Ok, no boot log as there is no connection established between emploder and the empeg.
The empeg does show up in the device manager as "rio car" in the USB connections, but i cant adress it.
I didnt post any pictures, as i dont have a camera with a high enough resolution (me noob thought the cell phone pics might do ).
On careful visual inspection and cross-checking with every FAQ topic remotely covering my problem i am just a clueless as before.

1. The PC recognizes the USB connection but doesnt show the radio as a device.
2. emplode cannot find the empeg by USB or Serial Cable. I skipped the ethernet cable here.
3.The cable conections between the 2 hard drives and the board is okay.

Can anyone make sense out of this?