Quote:
Your config.ini is stored on drive0. Since you just swapped drives you probably need to reset your IP address settings over serial or USB first (or put your empeg on a network with a DHCP server).

Well, the odd thing is that I was able to access this drive through the network before, but now I can't. If you read above, I can connect to the empeg through the network (w/ DHCP server) when another drive is drive 0, but when I add this new drive as drive 1, I can no longer access it! It doesn't make sense.


Edited by errol (27/10/2005 22:23)