Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#366253 - 14/03/2016 18:14 Control music with remote on Aux
stepking2
new poster

Registered: 17/10/2013
Posts: 34
Loc: Norway
Hi, is there a possibilty of controlling music from a phone, through Aux, with the Rio/Empeg remote control. It makes it a whole lot simpler and road-safe than fiddeling with your phone.

Top
#366254 - 14/03/2016 18:19 Re: Control music with remote on Aux [Re: stepking2]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31596
Loc: Seattle, WA
Not with the Empeg remote, no.

Third party remotes exist for controlling phones though. Here's one example:
http://www.amazon.com/Century-Accessory-...e+control+music
_________________________
Tony Fabris

Top
#366256 - 15/03/2016 11:35 Re: Control music with remote on Aux [Re: stepking2]
stepking2
new poster

Registered: 17/10/2013
Posts: 34
Loc: Norway
I meant to change songs, play/pause etc. with either the remote or the buttons on the Empeg itself.

Top
#366257 - 15/03/2016 13:35 Re: Control music with remote on Aux [Re: stepking2]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14491
Loc: Canada
Some software development would be necessary to make this work.

One would just connect a $2 bluetooth serial adapter to the serial port on the empeg, and then have the empeg translate button presses into bluetooth commands for the phone.

Top
#366258 - 16/03/2016 12:57 Re: Control music with remote on Aux [Re: stepking2]
stepking2
new poster

Registered: 17/10/2013
Posts: 34
Loc: Norway
Thats not a bad idea, I was goint to buy a 3.5mm jack to bluetooth transmitter for the phone, but I guess phones can connect to multiple bluetooth devices at the same time.

About the button translation, is there a configuration file for that, or a guide?

Top
#366259 - 16/03/2016 14:09 Re: Control music with remote on Aux [Re: stepking2]
mlord
carpal tunnel

Registered: 29/08/2000
Posts: 14491
Loc: Canada
If you want to go that route, remember my first sentence above:
Quote:
Some software development would be necessary to make this work.


I suggest you first get the bluetooth adapter to work from an ordinary PC, and see if you can figure out how to get the phone to respond to commands sent via that adapter.

If you get that working first, I'll help with the empeg side.

Cheers

Top