Parts interchangeablility? | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Parts interchangeablility?

Topic Options

#276823 - 03/03/2006 14:41 Parts interchangeablility?
Ladmo addict Registered: 04/09/2004 Posts: 527 Loc: Oklahoma	One of my spare units is a MK2 (No printing on the back of the case). The rotary knob is difficult to work. I was wondering if it is ok to take a display board (with the knob and all) and just swap it out with a mk2A one? I still have the peices of the MK2 that has the shot main board, and the display/control board should still be good. It would just be a matter of a couple of connectors carefully swapped out? Any info really apprecated! dww
Top

#276824 - 03/03/2006 14:46 Re: Parts interchangeablility? [Re: Ladmo]
JBjorgen carpal tunnel Registered: 19/01/2002 Posts: 3584 Loc: Columbus, OH	Yes. Check this thread for more info, particularly this post. _________________________ ~ John
Top

#276825 - 03/03/2006 17:27 Re: Parts interchangeablility? [Re: Ladmo]
tfabris carpal tunnel Registered: 20/12/1999 Posts: 31600 Loc: Seattle, WA	Just make ABSOLUTELY SURE that you don't plug in the display board cable off-by-one-pin or else you will BLOW FUSES and maybe other bad things. Triple and quadruple check and make really really really sure. _________________________ Tony Fabris
Top

View All Topics