Emplode is giving me a "download failed when checking database" error. I tried downgrading to 2.0 and i also tried rebuilding the database using the directions at http://www.riocar.org/modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=8&faqent=220#220 but it did not help. What should I try next?





empeg-car bootstrap v1.02 20001106 (hugo@empeg.com)/12/24.IP 1.0 for NET4.0tarting playerpl
empeg usb
If there is anyone present who wants to upgrade the flash, let them speak now,y.e support initialised 0089/88c1 (save to d0004e00).
! tunedb_d
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
empeg power-pic driver initial
LAC construct 0x405ae008

e000 v1.04 Linux-2.2
Copying kernel...car - 2.1490 Dec
Calling linux kernel...s of 4096K size

Uncompressing Linux..................................... done, booting the kerne-
Probing primary interface...
empeg
hdb: F
l.TS
Linux version 2.2.14-rmk5-np17-empeg54 (rob@tatu) (gcc version 2.95.3 20010315 (L2300AT, ATA DISK drive.
hdb: FUJITSU MHL23
release)) #48 Wed Dec 24 15:41:06 GMT 2003is 206f6972 'ri
ide0 at 0x000-0x007,0x038
Processor: Intel StrongARM-1100 revision 11
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b
Dentry hash table entries: 2048 (order 2, 16k)heck:20k re
hdb:
Buffer cache hash table entries: 16384 (order 4, 64k) < hda5 hda6 > hda2 hda3 hda4000-0x007,0x038 on irq 6
Page cache hash table entries: 4096 (order 2, 16k)hdb4
RAMDIS
POSIX conformance testing by UNIFIX2048kB Cache, CHS=58140/16/63
Linux NET4.0 for Linux 2.2blocks [1 disk] into ram d
Based upon Swansea Universit
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UARTic partition read-o
Signature is 206f6972 'rio ' (1998060
Memory: 15024k/16M
empeg display initialised.reserved, 372k data, 4k in
empeg dsp audio initialised(Dag Brattliystem) readonly
empeg dsp mixer initialised
empeg dsp initialised
D
empeg audio-in initialised, CS4231A revision a0066e000sic partition read
empeg remote control/panel button initialised.mount /dev
Page cache hash table entries: 4096
empeg usb initialised, PDIUSBD12 id 1012y NET3.039
ircomm_tty: vir
empeg state support initialised 0089/88c1 (save to d0004e80).nformance testing by UNIFIXond music partition334
empeg RDS driver initialisedtitiofirst music partition r
empeg power-pic driver initialised (first boot)ockEntry) = 16ayerJITS
Remou
RAM disk driver initialized: 16 RAM disks of 4096K sizer Society NET3
hda: FUJITSU MHL2300AT, ATA DISK drive
Starting player6384 bh
hdb: FUJITSU MHL2300AT, ATA DISK drive (ehash 16384 bhash 16384)pp: 49:size
ide0 at 0x000-0x007,0x038 on irq 6

! memory_

IrDA (t
hda: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/6305ae008
Prolux 4 empeg car - 2.1490
Lin
hdb: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63
V
empeg-flash driver initialized
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Remounting first music partition read-only
Remounting second music partition read-only
Press 'q' now to go into development mode. You Have Zero Seconds To Comply...
Starting player
allocating_buffer_pool.cpp: 49:sizeof(BufferEntry) = 32
allocating_buffer_pool.cpp: 50:sizeof(BlockEntry) = 16
player.cpp : 569:empeg-car 3.00-alpha5 2003/12/24.
! memory_stream.cpp : 42:MemoryStream failed to allocate memory.
! tunedb_disk.cpp : 878:Failed to build database. Bad. 0xc007000e
LAC construct 0x405ae008
Prolux 4 empeg car - 2.1490 Dec 24 2003
Vcb: 0x4066e000

Do you have a ReserveCache set in config.ini?

player.cpp : 569:empeg-car 3.00-alpha5 2003/12/24.

seems as if you're still on a5. downgrade to a3 or v2final.

Can i check config.ini without being able to connect to the player? Also, I am still having the problem with 2.0 i just happened to print the boot log thing after switching back to 3.0a5

If you can install Hijack you should be able to ftp in and fetch the file.

Logo Editor is giving me error 53 when i try to instal hijack

mmm.. if i recall correctly, i think 53 is 'file not found'
perhaps you mistyped a location?

If you get error 53 when you run logo editor, it means you have not installed it correctly. Make sure to unzip everything, not just the main EXE.

Really, though, my main advice to you would be to just skip the alpha software that you're running and go back to 2.0 final. You'll have much less trouble with that and it will "just work".

I am running 2.0 and the database problem wont go away. Emplode still can not connect. I got hijack installed and i can connect with ftp...but what should i do?