Hi,
When restarting my player, I saw it doing a "rebuild database" and when I've started my Emplode I received a lot of "Initializing Warnings of Playlist lengths" and I saw that my playlists were completely scrumbled. When doing searches, I can't even find some songs anymore !!
Is there a way to find back my previous database organisation ?
P.S. : What I did just before was changing the field "khttpd_port=82" to 80 in my config.ini file with my Emplode but I didn't synchronise it. Could this be at the origin of this mess ?
Years of work are in the air. Is there an angel who could help me ?

Delete the database files, and do two more syncs. And call me in the morning.. (when my phone is OFF).

-ml

Check on this possibility first, then check to see if you are having disk drive trouble. If both of those things are OK, then check and see if you get e2fsck errors at the shell prompt, and finally, as Mark said, see if rebuilding the databases by hand fixes it.

Thanks for such a prompt answer.
Could you confirm if I have a disk problem (see here after) ?
If yes, I suppose that I have to open the box and check for the cables. And how can I see if the second disk is completely out of order ?
- My /drive1 directgory is empty !!!
- And this is an extract from my boot
Probing primary interface...
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DJSA-210, 9590MB w/384kB Cache, CHS=19485/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0a:d
8
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
empeg-pump v0.03 (19980601)
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting
player
Hijack: intercepting config.ini

hijack: removed menu entry: "Serial Port Assignment"
khttpd: listening on port 82
kftpd: listening on port 21
player.cpp : 385:empeg-car 2.00 2003/04/01.
Prolux 4 empeg car - 2.1434 Mar 26 2003
Vcb: 0x4086d000

DDA

- My /drive1 directgory is empty !!!

I think this might be an indicator of the problem. Also, I think that your boot up sequence is showing that only the first disk drive is being detected. So yeah, if it's a two-drive player, then it looks like one of the drives might not be booting up. Time to open it up and check the cables, the jumper, and the IDE header. Also make sure you've got standoff washers on the drives and loctite the screws while you're in there. Make sure to carefully follow the disk upgrade guide for the disassembly instructions.

You're my angel Tony. Domo Arrigato, Mr. Riocaro.
I've opened the box. Didn't see anything special but plugged out the disk cable and plugged it in again. Closed everything and restarted the player. It found back the second drive and I found back all my playlists and song without any error message from Emplode.
Ouffffffffffff.
Let's have a dram of single malt to celebrate and let's try again to put this http port back to 80 in config.ini. This must be the source of the problem I've posted in the Programming thread to make your EmpegFace work. I don't remember why I've put this once on 82 but ...