Quote:
You're forwarding both TCP and UDP packets?

Try putting the xbox as the DMZ host and see if it works.

Matthew


Yep - both TCP and UDP. I can test the port forwarding by doing a "telnet <ip address> 3074" - which is the TCP port. It works fine. XBox NEVER uses it though. I only see packets originating within my network.

The device doesn't have a DMZ like the low end routers do either.

I've used a ANY ANY ANY policy on the XBox, so that ALL incoming packets will get through, no matter what port, and I still see a "strict" setting, and no outside originated packets. It's my NAT that's hosing me.

- Jon