Doug

4C89-200C-2005-477K-055X-4025-1E1M-**** (*)
1A4C-0800-0000-2900-5784-****

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2

Recorder:             <PHILIPS SPD2513P>        Version: MP03 - HA 1 TA 0 - 7.10.1.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <PHILIPS  SPD2513P        >Version: MP03 - HA 1 TA 0 - 7.10.1.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
                     : WDC WD1001FALS-75J7B    05.0  nvstor32 Port 2 ID 0  DMA: Off
                     : MAXTOR STM3320620AS     3.AA  nvstor32 Port 2 ID 1  DMA: Off
                     : MAXTOR STM3320620AS     3.AA  nvstor32 Port 3 ID 0  DMA: Off
                     : PHILIPS SPD2513P        MP03  nvstor32 Port 4 ID 0  DMA: Off

=== CDRom-Device-Map ===
PHILIPS SPD2513P           Z:   CdRom0
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2097151kB)
Free physical memory: 2008MB (2057076kB)
Memory in use       : 34 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.4.2010
CD Image
17:10:27	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
17:10:27	#2 Text 0 File Burncd.cpp, Line 3196
	PHILIPS SPD2513P
	Buffer underrun protection activated
	
17:10:27	#3 Text 0 File Burncd.cpp, Line 3508
	Turn on Track-At-Once, using CD-R/RW media
	
17:10:27	#4 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:   359845 ( 79:59.70)
	Last address to be written:                897 (  0:13.72)
	
17:10:27	#5 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
17:10:27	#6 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: PHILIPS SPD2513P;
	   CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
	   ATIP Data:
	     Special    Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
	     Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
	
17:10:27	#7 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
17:10:27	#8 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 898 (898) = #898/0:11.73
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 896 blocks [Z: PHILIPS SPD2513P]
	--------------------------------------------------------------
	
17:10:27	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [Z: PHILIPS SPD2513P] for write in TAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0        307200       2146304, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	     -150 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	     -150 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |      898 |      898 | 0x00
	      898 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
17:10:27	#10 Text 0 File ThreadedTransferInterface.cpp, Line 1066
	Removed 2 run-out blocks from end of track 1. Length: 898 -> 896.
	
17:10:27	#11 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
17:10:27	#12 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
17:10:27	#13 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
17:10:27	#14 Text 0 File Burncd.cpp, Line 4413
	Cache writing successful.
	
17:10:27	#15 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
17:10:27	#16 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 48x (7,200 KB/s)
	
17:10:27	#17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
17:10:27	#18 Text 0 File MMC.cpp, Line 22379
	Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
	
17:10:27	#19 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
17:11:21	#20 SPTI -1106 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x73
	Sense Qual: 0x03
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 
	Buffer x099b0040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
17:11:21	#21 CDR -1106 File Writer.cpp, Line 303
	Power calibration error
	Z: PHILIPS SPD2513P
	
17:11:26	#22 CDR -201 File WriterStatus.cpp, Line 195
	Invalid write state
	Z: PHILIPS SPD2513P
	
17:11:26	#23 TRANSFER -18 File WriterStatus.cpp, Line 195
	Could not perform EndTrack
	
17:11:26	#24 Text 0 File MMC.cpp, Line 17147
	<PHILIPS SPD2513P        > start Close Session
	
17:11:26	#25 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 48x (7,200 KB/s)
	
17:11:26	#26 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
17:11:28	#27 Text 0 File Cdrdrv.cpp, Line 11185
	DriveLocker: UnLockVolume completed
	
17:11:28	#28 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon