#348069 - 14/10/2011 14:06
empeg history @ solid state startups
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
I was slightly volunteered to give the next talk at Solid State Startups, a meetup group talking about HW startups... so on November 15th at 7pm I'll be at Hacker Dojo talking about empeg. http://www.meetup.com/Solid-State-Startups/?gj=ej4&a=ti1_lm1If any empeggers want to come and bring their empegs, that'd be great... my lone mk2 will be there but I'm sure there will be lots of inquisitive people. You don't need to join the Dojo to come to talks, and there's always a possibility of beer afterwards - in my case, I think I'll have a beer before given my fondness for public speaking :|
|
Top
|
|
|
|
#348070 - 14/10/2011 14:12
Re: empeg history @ solid state startups
[Re: altman]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Sounds good! I'll put you on my calendar.
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#348077 - 14/10/2011 20:36
Re: empeg history @ solid state startups
[Re: Robotic]
|
enthusiast
Registered: 21/02/2006
Posts: 325
|
Hi,
Do you want to borrow a few Empegs for display?
Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
|
Top
|
|
|
|
#348080 - 15/10/2011 00:06
Re: empeg history @ solid state startups
[Re: Ross Wellington]
|
carpal tunnel
Registered: 17/12/2000
Posts: 2665
Loc: Manteca, California
|
It would be crushing to learn that Hugo no longer owned an Empeg.
_________________________
Glenn
|
Top
|
|
|
|
#348081 - 15/10/2011 06:07
Re: empeg history @ solid state startups
[Re: gbeer]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
I definitely own about 10 empegs (in various states including some of the original protos) but most of them are in the attic in Cambridge vs with me here. Additional empegs in a demo-type setup would be great as I'm sure there will be curious attendees who want to play with one before/after/during the talk ![smile smile](/images/graemlins/default_dark/smile.gif) (and empeg owners who would like to demonstrate how ahead of the curve they were back then, and show how the queue management is STILL better than most mp3 players today!)
|
Top
|
|
|
|
#348087 - 15/10/2011 11:48
Re: empeg history @ solid state startups
[Re: altman]
|
carpal tunnel
Registered: 23/09/2000
Posts: 3608
Loc: Minnetonka, MN
|
(and empeg owners who would like to demonstrate how ahead of the curve they were back then, and show how the queue management is STILL better than most mp3 players today!)
Better than most, as if there is one that is even close.
_________________________
Matt
|
Top
|
|
|
|
#348093 - 15/10/2011 13:35
Re: empeg history @ solid state startups
[Re: msaeger]
|
carpal tunnel
Registered: 13/07/2000
Posts: 4178
Loc: Cambridge, England
|
Don't forget to fetch the Chapter 11 sign out of storage...
Peter
|
Top
|
|
|
|
#348094 - 15/10/2011 13:45
Re: empeg history @ solid state startups
[Re: peter]
|
carpal tunnel
Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
|
As sad as it is that the empeg didn't live on in continued development, it's also quite sad that the iPod/iPhone software team at Apple didn't learn how to make a half-decent music player while Hugo was on site. Hugo, drop a hint about your current startup - if it's car audio related at all, I'll skip any further thoughts about sticking a Squeezebox server in my car piping through an iOS device for playback. ![wink wink](/images/graemlins/default_dark/wink.gif)
|
Top
|
|
|
|
#348103 - 16/10/2011 01:23
Re: empeg history @ solid state startups
[Re: hybrid8]
|
enthusiast
Registered: 21/02/2006
Posts: 325
|
Hi,
How many would you like? PM a quantity and an address to ship to.
I still have 12 after giving one away to a friend, that I have been using for regression testing. I could send Mk2 and Mk2a's, no Mk1's.
I can put in some older drives (12GB, 30GB, etc) if you want. I can even include a 500GB (2 each 250 GB drives) to show the .mp3 and .wav storage capability of a USER GROUP SUPPORTED, 2000 era player if you like.
Still haven't been successful integrating SATA drives yet (hardware, software, spare time issues), can't give you that yet. Would have been nice to send my 1TB SATA Laptop drive or a couple of 500GB drives in a player to you. The latest problem was with an Addonics PATA-to-SATA Adapter that use the Marvell chip. The first one allowed me to Pump the disk, load good player software, but then steps all over the Ethernet - won't even show the IEEE address in "About". Surprised me too. The second one was DOA this week. Done with Addonics - support said essentially "I don't know".
I'd be happy to send you some players.
Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
|
Top
|
|
|
|
#348104 - 16/10/2011 01:41
Re: empeg history @ solid state startups
[Re: hybrid8]
|
carpal tunnel
Registered: 06/10/1999
Posts: 2591
Loc: Seattle, WA, U.S.A.
|
Hugo, drop a hint about your current startup - if it's car audio related at all, I'll skip any further thoughts about sticking a Squeezebox server in my car piping through an iOS device for playback. Subscribe. Subscribe. Subscribe. Subscribe. Subscribe.
_________________________
Jim
'Tis the exceptional fellow who lies awake at night thinking of his successes.
|
Top
|
|
|
|
#348135 - 17/10/2011 14:28
Re: empeg history @ solid state startups
[Re: altman]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Does this group record video of the presentations they host? I'm sure many would enjoy your talk after the fact. Or- even during, if they do a live feed. ![wink wink](/images/graemlins/default_dark/wink.gif)
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#348234 - 21/10/2011 00:38
Re: empeg history @ solid state startups
[Re: peter]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
Hmmm, I've no idea where that got to. I have a feeling it's in Cambridge ![frown frown](/images/graemlins/default_dark/frown.gif)
|
Top
|
|
|
|
#348235 - 21/10/2011 00:41
Re: empeg history @ solid state startups
[Re: Ross Wellington]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
Thanks for the offer, but I think I can likely rustle up maybe 3 players total with local people and that should be good for the demo and playing with... if the patent case is done by then I'll even get my mk1 back!
Hmm, I thought ethernet was on the 3v side of the PIO buffers, so it not working with a type of drive is also surprising to me!
|
Top
|
|
|
|
#348237 - 21/10/2011 00:42
Re: empeg history @ solid state startups
[Re: jimhogan]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
I'm afraid it's not audio related. However, I confidently predict that many of you will really, really want the product when it comes out, and I look forward to seeing you all on the unofficial [insert startup name here] BBS for discussions about a product in active development (again) ![laugh laugh](/images/graemlins/default_dark/laugh.gif)
|
Top
|
|
|
|
#348238 - 21/10/2011 00:43
Re: empeg history @ solid state startups
[Re: Robotic]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
I've seen them recording them before, but I've never seen the output anywhere. I'll ask... they have 100mbit symmetric in the dojo so a live stream is very possible!
|
Top
|
|
|
|
#348239 - 21/10/2011 00:45
Re: empeg history @ solid state startups
[Re: altman]
|
carpal tunnel
Registered: 18/06/2001
Posts: 2504
Loc: Roma, Italy
|
ok, at least tell us when you're going to tell us, Hugo! ![smile smile](/images/graemlins/default_dark/smile.gif)
_________________________
= Taym = MK2a #040103216 * 100Gb *All/Colors* Radio * 3.0a11 * Hijack = taympeg
|
Top
|
|
|
|
#348241 - 21/10/2011 00:52
Re: empeg history @ solid state startups
[Re: altman]
|
carpal tunnel
Registered: 12/11/2001
Posts: 7738
Loc: Toronto, CANADA
|
I'm afraid it's not audio related. Is it video related? You don't have to give any more details than a yes or no. ![smile smile](/images/graemlins/default_dark/smile.gif)
Edited by hybrid8 (21/10/2011 00:52)
|
Top
|
|
|
|
#348244 - 21/10/2011 04:07
Re: empeg history @ solid state startups
[Re: hybrid8]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
Nope, not video related either. All will become clear in the first half of next year...
|
Top
|
|
|
|
#348249 - 21/10/2011 12:33
Re: empeg history @ solid state startups
[Re: altman]
|
enthusiast
Registered: 21/02/2006
Posts: 325
|
Hi,
Empeg Players -------------- Sure, if you need some just let me know.
Ethernet thing with the Addonics PATA-to-SATA Converter ------------------------------------------------------- I think it is an address space thing. They probably do some sloppy ADRxxxx kind of decode or something.
Is there a I/O amd memory map of the system somewhere? Is the location of the Ethernet stuff even located near the PATA location even with "don't care's" in the address decodes? I don't see how it could have access to another I/O port or mapped area since I thought I had heard that the player doesn't do DMA. It's not a big deal, I'll just move on to the next controller.
Presentation ------------- Good luck, and have fun with it. Isn't that why we do all of this stuff anyway? I'm sure they will be interested in what you have to say. I would imagine that the business model for start-ups might be different from when the EMPEG was developed. Much more caution and greed from principle investors these days.
Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
|
Top
|
|
|
|
#348254 - 21/10/2011 13:35
Re: empeg history @ solid state startups
[Re: altman]
|
carpal tunnel
Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
|
Is it kittens with laser beams for eyes ? It is ?
_________________________
Remind me to change my signature to something more interesting someday
|
Top
|
|
|
|
#348255 - 21/10/2011 14:21
Re: empeg history @ solid state startups
[Re: andy]
|
pooh-bah
Registered: 06/04/2005
Posts: 2026
Loc: Seattle transplant
|
Is it kittens with laser beams for eyes ? It is ? Pew! Pew!
_________________________
10101311 (20GB- backup empeg) 10101466 (2x60GB, Eutronix/GreenLights Blue) (Stolen!)
|
Top
|
|
|
|
#348257 - 21/10/2011 15:25
Re: empeg history @ solid state startups
[Re: hybrid8]
|
carpal tunnel
Registered: 10/06/1999
Posts: 5916
Loc: Wivenhoe, Essex, UK
|
Photoshop! Say it isn't true ![wink wink](/images/graemlins/default_dark/wink.gif)
_________________________
Remind me to change my signature to something more interesting someday
|
Top
|
|
|
|
#348258 - 21/10/2011 16:06
Re: empeg history @ solid state startups
[Re: Ross Wellington]
|
carpal tunnel
Registered: 19/05/1999
Posts: 3457
Loc: Palo Alto, CA
|
There's no address space overlap *at all* between the IDE and other devices. IDE has two chip selects and 3 address lines. The decodes to access other memory mapped peripherals use higher order address lines that don't go to the IDE connectors.
Even if the converter was pulling on data lines when it wasn't selected, I'm not sure it should affect ethernet (though it may affect the 4321, as I remember that could have been a 5v device).
The player doesn't do DMA, no. PIO only. The SA1100 had no external DMA abilities.
Hrm.
|
Top
|
|
|
|
#348259 - 21/10/2011 17:27
Re: empeg history @ solid state startups
[Re: altman]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
The IDE port, CS4321, and 91C96 are all on the 5V buffered side of the bus. BD0-BD8 (buffered 5V data) go to all three devices, and BD8-BD15 go to both the IDE and ethernet controller. BA0 and BA1 (buffered 5V address lines) are in common with all three devices, and BA2 goes to both the ethernet and IDE port.
5V versions of the read and write strobes are common to all three devices. They all have independent select lines.
If the converter was holding any of the above lines in the wrong state, it could well adversely affect the ethernet controller. If the CS4321 is working correctly, but the ethernet isn't, the obvious problem area would be either the top 8 bits of the data bus or BA2.
pca
_________________________
Experience is what you get just after it would have helped...
|
Top
|
|
|
|
#348260 - 21/10/2011 17:29
Re: empeg history @ solid state startups
[Re: altman]
|
enthusiast
Registered: 21/02/2006
Posts: 325
|
Thanks, that's what I thought.
The curious thing was that it preped the disk correctly and installed the player software correctly.
When I used the player About function from the front panel buttons, there was no information about the user (it said there was no user), and all of the Ethernet information was blank, like it had stepped on where the information was stored on the player somewhere? Memory thing again?
Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
|
Top
|
|
|
|
#348261 - 21/10/2011 17:43
Re: empeg history @ solid state startups
[Re: Ross Wellington]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
The IDE port has three address lines giving 8 16 bit registers directly addressable. Not all of them are decoded, there are some holes. I can't remember off the top of my head which ones, but I exploited that fact ten years ago to produce what was effectively an IDE-connected VGA card for the empeg, which could be connected to the IDE bus without interfering with the drives ![smile smile](/images/graemlins/default_dark/smile.gif) Now, it may be that the problem is essentially that the converter is nobbling one or more address lines that don't affect the IDE port, being a non-decoded/non-used location, but the same lines mapped into the ethernet address space prevent it from working correctly. As I remember the ethernet controller uses a lot of registers, and it would only take one to screw it up completely. Also, I very vaguely seem to recall that some of the IDE operations are 8 bit only, although I may be misremembering that. So again, if the higher data bits had an issue that might not affect the IDE to the point of killing it completely, although this seems much more unlikely to me. pca
_________________________
Experience is what you get just after it would have helped...
|
Top
|
|
|
|
#348263 - 21/10/2011 18:44
Re: empeg history @ solid state startups
[Re: pca]
|
enthusiast
Registered: 21/02/2006
Posts: 325
|
Hi,
IDE to VGA inteface, that's a new one, haven't heard about that one before. I used to integrate SVGA controllers onto X-Bus, EISA and VESA-local motherboards in a past lifetime. One actually made it into PC Magazine when they reviewed the first P5 processors a very long time ago. They liked it - it was an ATI Mach-32 VESA Local Bus based design. I also helped ATI debug the chip as well.
They didn't like the internal custom air scoop and fan that the Mechanicals shoe-horned in to cool the 5V 60/66 MHz Intel P5 processor. That chip ran V E R Y H O T. That was before 3.3V changed the world and we could all progress.
I'm not going to play with this Addonics converter much more. I think you probably have the right answer. I don't have schematics of the player so I had no idea of the mapping. I could have pulled out my logic analyzer (HP16500), but without a schematic, it would have been futile.
It's possible that the other converter (JMicron Chip based), may be doing the same thing just in a less obnoxious way. Although, I can FTP a crap-load of FIDS to it before it croaks.
I'm about ready to give up on interfacing SATA drives to the EMPEG.
Thanks for the explanation.
Ross
_________________________
In SI, a little termination and attention to layout goes a long way. In EMC, without SI, you'll spend 80% of the effort on the last 3dB.
|
Top
|
|
|
|
#348264 - 21/10/2011 18:57
Re: empeg history @ solid state startups
[Re: Ross Wellington]
|
old hand
Registered: 20/07/1999
Posts: 1102
Loc: UK
|
I can send you a schematic PDF if that will help...
pca
_________________________
Experience is what you get just after it would have helped...
|
Top
|
|
|
|
|
|