This sounds fine by me. Do you have an electronic payment (i.e., PayPal, etc.)?

Paul G.
SN# 090000587 (40GB Green)

Sounds great....email me your mailing address and I'll send the panel on it's way to you soonest. My email is "ineedcolor1@yahoo.com" Looking forward to this

Technoweenie
12 GB Blue / Red MK2

Sounds OK to me... Sign me up for a MkI panel.
How do you intend to handle payments?
Do you have a Paypal account or something similar?

/Michael

As I said earlier in this thread: "You shouldn't need a template - that's why I did the drawing."
So to reiterate: You might like to check with whoever's going to make these screens whether they need a screen as a template at all. They should just be able to take the CAD drawing file I've made available here and generate a CNC part program from it directly. ie without using a template.
Please let me know if anyone's having a problem understanding this. Or is it me that's missing something?

beaker
12 gig blue/magenta/orange/yellow (at the moment :-))

Edited by beaker on 01/05/01 09:53 PM.

[Shameless plug for logo site]Have you uploaded that logo to the empeg logo repository site at http://empeg.miniinfo.net [/Shameless plug for logo site]

Ok guys. Yes I do have a paypal account. It is drkstorm@bellsouth.net

Anyone that wants one needs to email me his/her shipping address, whether it's a Mark I or Mark II/Rio, specify clear or smoke and send payment through paypal (use my email).

If you don't have paypal, email me and we'll find a different way to pay.

I figure that $2 should cover postage to most anywhere.
So include the postage with payment.

Mark II units will be a bit before they're ready to be sold.

Beaker, though they are very good drawings I would rather have an actual unit to go by to see clearances I have to work with and be able to match it up with an original correctly.

Steve

OK, I just thought I'd draw it up and make it available to save someone the hassle & cost of postage. The dims on the drawing are actual measured sizes so to be safe I would have probably used a minus 0.2mm tolerance on external dims and a plus 0.2mm tolerance on internal dims. Anyway if you'd rather have an actual screen to make from it's up to you. Just thought I'd try to help out. Good luck .

beaker
12 gig blue/magenta/orange/yellow (at the moment :-))

ewww; why mix empeg w/ autopc??
-m

...proud to have owned an Empeg since 00287

Alright now, guys.
The AutoPC was only a starting point because I wanted a logo with PC in it because after all the empeg IS a pc.
I have since modified it. It is now displaying empeg mobilePC.

Steve

Remember to keep in mind guys that Mark II/Rio lenses will be maybe a couple of weeks before they're ready.

I need to wait for my test faceplate to arrive before I can make my patterns.

Steve

Go ahead and email your info like I said in my earlier post to drkstorm@bellsouth.net

Steve

Do you need a faceplate? I can get one in the mail to you if you need one.

Paul G.
SN# 090000587 (40GB Green)

Thanks but "ineedcolor" said he sent one to me on the 1st.

I don't think there's going to be any problems but if things don't work out with him I'll keep you in mind for a backup.

Steve