Okay. Good news! I found them. I have enough PCBs to build 5 more sets. I've had requests for two including yours. Does anyone else want one either complete boards or PCBs?

If you would like one, please PM me.

Thanks,
Stu

Where were they?

Up on a high shelf on top of a bunch of color toner cartridges of course ! Funny I always thought I had put the PCBs with the rest of the project parts. They actually fell on top of me as I pulled the boxes out. Anyway, all is well now.

Stu

any chance of these being produced again? I been away from the bbs for awhile. Missed out on ordering 1.

If people will PM me with their interest and the list climbs to 15, we can do another run. Sorry I've been away for a while too,

Stu

Because of the building interest of another run of extenders, I am now officially taking orders for a third and most likely final run. If you would like to get one, please PM me. As the interest grows your name will be added to the list in this thread as we have done in the past. Once we hit 15 sets, you will be contacted with payment information. The cost for an assembled set with 20 feet of cable will now be $288 plus shipping - sorry, but prices of everything have gone up since the last run!

So far we have:
1. Charles Beer - 1
2. smu - 1

Thanks,
Stu

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1

Thanks,
Stu

cmon didn't anyone else want one?

we still need 12 more people to get the ball rolling here.

Want, yes. Have funds to pay for, no.

Count me in for one.

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1

By the way, if anyone would prefer, they can order bare PCBs at $40 per set. 15 of those or a combination of them and complete sets will allow us to proceed.

Thanks,
Stu

I'm definitely up for a PCB set but I'd like to keep the option open (fund permitting at the time) to 'upgrade' to a ready built extender if that's okay

It's not a problem at all. The PCBs are the limiting factor here anyway.

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)

Thanks,
Stu

Stu,What else is required if one were to just buy the PCB board?

Well, it would require quite a few passive components, RS-432 drivers, and various connectors and cables. It's all off the shelf stuff although some of it is easier to acquire than others.


Stu

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)
6. jimhogan - 1

Thanks,
Stu

OK, I'll take one too. I'll be changing car soon and don't know how the full empeg would fit.

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)
6. jimhogan - 1
7. elperepat - 1

Getting closer!

Thanks,
Stu

Why not buy a spare just so others can have their first? count me in.

(oh, thank you mr. bush for the extra $600 that i will be spending on empeg bits and beer. that's going to help the economy!)

Shoot...sign me up for some bare PCB's. If I ever want to do this, then at least I'd have the option. If not, I'm only out $40.

Oh, that's a good idea. Stu, could you please convert my request to 2 bare PCBs sets instead of 1 complete kit.

Thanks!

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)
6. jimhogan - 1
7. elperepat - 2 (PCBs only)
8. thirdeyevision - 1
9. JBjorgen - 1 (PCBs only)

I think that's everybody.

Thanks,
Stu

I don't post often. Lurked forever but can you add me to the list for one. Thanks!

Here is the updated list of interested parties:

1. Charles Beer - 1
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)
6. jimhogan - 1
7. elperepat - 2 (PCBs only)
8. thirdeyevision - 1
9. JBjorgen - 1 (PCBs only)
10. Mitsu7374 - 1

By my count we're at 11.

Thanks,
Stu

add me in for a set of pcbs as well as the full kit n kaboodle.

1. Charles Beer - 1, 1 (PCBs only)
2. smu - 1
3. kjohanss - 1
4. tfabris - 1
5. AndrewT - 1 (PCBs only)
6. jimhogan - 1
7. elperepat - 2 (PCBs only)
8. thirdeyevision - 1
9. JBjorgen - 1 (PCBs only)
10. Mitsu7374 - 1

And that makes 12. Thanks.

Stu

Charles Beer is on there twice?

what's the price without the 20 feet of cable?
but put me in for a full kit...
could it be an option to solder it myself? or would it not make any differnce in price?