Need Help with Upgrade Please | Technical / Troubleshooting | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Technical / Troubleshooting » Need Help with Upgrade Please

Page 2 of 2

2

Topic Options

#280688 - 08/05/2006 10:33 Re: Need Help with Upgrade Please [Re: pgrzelak]
Gallagher419 journeyman Registered: 14/12/2004 Posts: 95	No such luck with that Paul and I have attached another hyperterm capture upon the reboot. Attachments 281223-hyper.TXT (187 downloads)
Top

#280689 - 08/05/2006 10:33 Re: Need Help with Upgrade Please [Re: pgrzelak]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Marking thread as having a new post... By the way, did you initialize the dynamic data partition also? That would have been this command: "dd if=/dev/zero of=/dev/hdc3". Just checking. _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#280690 - 08/05/2006 10:35 Re: Need Help with Upgrade Please [Re: pgrzelak]
Gallagher419 journeyman Registered: 14/12/2004 Posts: 95	Quote: Marking thread as having a new post... By the way, did you initialize the dynamic data partition also? That would have been this command: "dd if=/dev/zero of=/dev/hdc3". Just checking. Yes I did do that too.
Top

#280691 - 08/05/2006 10:37 Re: Need Help with Upgrade Please [Re: Gallagher419]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Excellent... _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#280692 - 08/05/2006 10:42 Re: Need Help with Upgrade Please [Re: pgrzelak]
Gallagher419 journeyman Registered: 14/12/2004 Posts: 95	Success! It is showing 110 GB of free space in Emplode. You are my hero Paul! Seriously though thank you very much for all the troubleshooting and help I really appreciate it!
Top

#280693 - 08/05/2006 10:46 Re: Need Help with Upgrade Please [Re: Gallagher419]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Cool!!! No worries. Glad I could help! Roger - if you are reading this, one thing though is that the notes assume that you are always working with the second drive / drive1 / hdc... EXCEPT for the directory creation step, which for some reason assumes the first drive, with a note below saying you might need drive1. You might want to swap this, so that the file is internally consistent. A thought... _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#280694 - 08/05/2006 11:06 Re: Need Help with Upgrade Please [Re: pgrzelak]
Roger carpal tunnel Registered: 18/01/2000 Posts: 5683 Loc: London, UK	Quote: You might want to swap this, so that the file is internally consistent. Done. What I've done is to change the instructions so that it assumes you're doing this to the second drive in an empeg. This seems to be the commonest case. If you're doing something else (like partitioning and formatting with the new disk plugged into your PC), I've assumed you're smart enough to alter the instructions accordingly. _________________________ -- roger
Top

#280695 - 08/05/2006 11:08 Re: Need Help with Upgrade Please [Re: Roger]
pgrzelak carpal tunnel Registered: 15/08/2000 Posts: 4859 Loc: New Jersey, USA	Thanks!!! _________________________ *Paul Grzelak* 200GB with 48MB RAM, Illuminated Buttons and Digital Outputs
Top

#280696 - 08/05/2006 11:09 Re: Need Help with Upgrade Please [Re: Gallagher419]
mlord carpal tunnel Registered: 29/08/2000 Posts: 14493 Loc: Canada	Quote: I do not see any errors at all but when I run emplode it only see's the 20 gb hdd. If I recall correctly, emplode never sees hdds. It only sees used/free capacity. What exactly indicates to you that there might be a problem? EDIT: never mind.. I see the problem was resolved already! Cheers Edited by mlord (08/05/2006 11:11)
Top

Page 2 of 2

2

View All Topics