Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Page 2 of 2 < 1 2
Topic Options
#272043 - 20/02/2006 03:46 Re: New Hobby... [Re: pca]
RobotCaleb
pooh-bah

Registered: 15/01/2002
Posts: 1866
Loc: Austin
I said to Cedar "Let's go out with the video camera and wreck this thing."
I knew it was above my skill level. It was windy. I only had it under control for a tiny amount of time.

http://gallery.l0ser.net/v/adventures/rccrafts/rcplanebuilds/hydrofoam/

Top
#272044 - 20/02/2006 13:09 Re: New Hobby... [Re: RobotCaleb]
pca
old hand

Registered: 20/07/1999
Posts: 1102
Loc: UK
Ack. Sorry to see that happen! Those flying boat things are not at all easy to fly well, they respond very aggressively to control inputs and they're fast.

It happens to everyone sooner or later, though:



This was at the local flying club at the weekend. The pilot is quite good, and thought he was long past his "new airplane every session" approach to learning. Then, on a perfect approach to a touch and go, four feet up, he hit the wrong joystick. Down elevator rather than more throttle. Instant lawn dart.

Funniest crash I've every seen, it looked so deliberate. Luckily aside from a broken prop, some sheared off nylon screws, and a divot out of the runway (which we made him put back ), there was no damage, and it was flying again in ten minutes.

My shiny piper cub from a previous post had a first flight of all of 5 seconds. That ended in a field in bits. One wingtip needed to be completely rebuilt, the left wing needed to be re-covered, and I had to tig weld the undercarriage back together again. The fault? I forgot to run the antenna wire out of the fuselage, so the radio range was about 100 feet

The second flight nearly ended in grief as well, on Saturday. I made a remarkably fast takeoff (I was rather conservative in motor choice as it turns out, it's got about 200% as much power as it really requires), then spent the next five minutes going in large left hand circles while sweating a lot as a friend tried to trim out the tx controls for me. I couldn't afford to take my eyes off the thing. We eventually got it flying more or less straight, and after about 15 minutes flight where I was almost under control, I managed to pull off a perfect landing.

It was at that point we found that the left aileron servo had broken loose from it's mounting point in the wing, which meant I'd been flying a known somewhat difficult model on one aileron with the other acting as an airbrake! I was, paradoxically, rather glad to see the fault. I had been beginning to feel that I really didn't know how to fly at all, but it turned out to not be entirely my own incompetence

pca


Attachments
276574-whoops.jpg (129 downloads)


Top
#272045 - 20/02/2006 13:12 Re: New Hobby... [Re: RobotCaleb]
BAKup
addict

Registered: 11/11/2001
Posts: 552
Loc: Houston, TX
Yup, that's about how well I did every time I tried to fly my Hobby-Lobby flat foamy Yak.

I went out a got a new Slowstick, and got it together. But I've now found out that the CVS camcorders are now locked down tight, and the short method no longer works. I'm going to have to look for something different now.
_________________________
--Ben
78GB MkIIa, Dead tuner.

Top
#272046 - 04/03/2006 05:00 Re: New Hobby... [Re: pca]
SuperQ
addict

Registered: 13/06/2000
Posts: 429
Loc: Berlin, DE
neat, I uploaded one of the videos to google video.. works great.

http://video.google.com/videoplay?docid=-9125108975591988899
_________________________
80gig red mk2 -- 080000125
(No, I don't actually hate Alan Cox)

Top
#272047 - 19/03/2006 18:59 Re: New Hobby... [Re: BAKup]
BAKup
addict

Registered: 11/11/2001
Posts: 552
Loc: Houston, TX
I was flying my Stryker down in Galveston at the beach today. I really shouldn't have since the wind was so strong. 3 bad crashes, and one stripped servo later, I decided to stop. Hot melt glue is great stuff.

The wind was so strong, I was slope soaring instead of flying. Landing was a pain in the ass. And on the last flight, the stripping servo made it impossible to land nicely.

Got some pics of the plane during one of the flights though.

http://www.konosky.org/gallery/album07

Now off to the hobby shop to get some new servos.
_________________________
--Ben
78GB MkIIa, Dead tuner.

Top
Page 2 of 2 < 1 2