So, this project was on hold for the last three weeks as I had my apt bathroom re-done. I just resumed it and decided to give the hole saw a try. It worked nicely, I have to say. Here are some pictures for you.
As you can see 90% of the edges are nice, 10% a bit too sharp. However, I fitted the rubber finishing I planned to use, and it looks decent.
Server HDD temp, after 1 hr running with the new panel fitted, raised from 30°C to 33°C . It seems stable now.
Thanks again everyone for the many suggestions!
Edit: Sorry pictures 01, 05, 09 are too big to show in the post. Just click on them if you're curious, of course.
Attachments
01.jpg (199 downloads)05.jpg (207 downloads)09.jpg (202 downloads)
_________________________
= Taym =
MK2a #040103216 * 100Gb *All/Colors* Radio * 3.0a11 * Hijack = taympeg