Since this installation, limited as it is, does not use the empeg mounting sled, I am using the AC adapter socket.

The player will be located at about thigh level between the driver and passenger towards the rear of the center console, with the screen facing up at a 60 degree angle from horizontal. In that location (not optimal, I know, but I have limited options), night-time dimming won't be necessary. I'll be able to use the volume controls on the steering wheel, but the rest of the empeg functions will have to be by remote, probably have to bounce the signal off the headliner. The AUX input for the car stereo system is located two inches from the back of the empeg.

Attached is a paper mockup (1/2 scale) of what the empeg will sit in. It will be attached through the "foot" with a knob that can be loosened so the player will rotate to face either the driver or the passenger. It's a pretty simplistic installation, but enormously better than no empeg at all!

tanstaafl.