Victory is mine!(*)

(*)Not completely.

Last night I installed at 16GB Transcend 133 card into my Carbon. I installed firmware 3.04 successfully.

The card formatted to 8GB. Initially it would shut down every time I attempted a write operation, but I think that was due to a touchy USB connector. The 3.04 firmware would only allow MTP connection. I believe I have 3.02 at home (a two hour drive away at the moment) which does allow MSC and MTP connections.

So, here's a question - is there any method of getting the firmware to set a larger partition or should I just drop back to an 8GB card and call it a day?

Best,
-Zeke

edit: Oh yeah, the boot time also decreased from around 20 seconds to about 8 seconds.